Industrial Grade Heat & Solvent Resistant Calendered Film

DPF 9000 is a satin white, engineered vinyl with a medium initial tack, permanent adhesive. This digital film for solvent-based printers is recommended for applications where the graphic is exposed to high heat, solvents or petrochemical-based products such as gas pump skirts and vehicle wraps. Its lay-flat, polycoated liner makes printing with solvent-based inks and wet applications even easier. The film features superior scratch and abrasion resistance and good dimensional stability with a durability rating of 7 years unprinted.

Arlon DPF 8000 Product Description

Gasoline Pumps
Fleet Markings
Boat Decals
Fleet markings, decorations for railway car, bus, boat, and recreational vehicle.
Motorcycle markings requiring Bake Cycle Curing.

Property	Test Methods	Typical Value
Surface Finish	Gloss Meter 60° Reflection	40% to 60%
Thickness	Micrometer, Federal Bench Type	3.5-mil (90 micron)
Tensile Strength	Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction	13.0 lb/in width	2.3 kg/cm width
Elongation	Instron Tensile Tester as above	100%
Shelf Life	Free from excessive moisture, temperature, direct sunlight	1 year from factory shipment
Application Temperature Range	On clean, dry substrate (flat)	40°F to 100°F optimum	4.4°C to 38°C optimum
Service Temperature Range	On clean, dry substrate	-65°F to 225°F	-54°C to 107°C
Dimensional Stability	158°F (70°C), 48 hours	20 mils	0.50 mm
Peel Adhesion	PSTC-1, 15 min, RT 70°F (21°C)	2.5 lbs/in	0.45 kg/cm
Liner Release	TLMI Release at 90°, 300 in/min (760 cm/min)	30 g/2 in	12 g/cm