A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make StripFlock Pro excellent for retro designs like you'd find in a mall in the 80's, or anytime you want a deep, rich look. StripFlock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim, and other garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as EasyWeed Stretch for an embossed look, or layer with more StripFlock! The ability to layer this material with itself and others allows you to say “yes” to multi-color designs. However, please note that for best results all fluorescent colors are recommended to be layered with the knockout method and the carrier peeled warm.
StripFlock Pro is 410 Microns / 16.1 mils and is a PVC composition.
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier warm
100% Cotton
100% Polyester
Poly/Cotton Blend
Laser Friendly
Iron On
CPSIA Certified
Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
StripFlock Pro
StripFlock Pro Tips & Tricks
How to Apply StripFlock Pro
01
White
02
Black
03
Royal Blue
04
Navy Blue
05
Red
06
Yellow
07
Green
08
Orange
09
Fuchsia
10
Pale Blue
11
Brown
14
Burgundy
15
Purple
21
Lemon
22
Grey
27
Turquoise
55
Bright Red
65
Light Pink
80
Anthracite
This durable stainless steel tool will not bend or break when weeding designs and can be sharpened if necessary. The Siser Weeder features a comfortable rubber grip and allows you to weed Heat Transfer Vinyl and Pressure Sensitive Vinyl with speed and accuracy - even in small cavities!
Achieve even pressure with Siser’s Heat Transfer Pillows! The Heat Transfer Pillows have a soft foam core covered by our non-stick Heat Transfer Cover Sheet material. Most commonly used to even out pressure while heat applying garments with zippers, buttons, seams, hoodies, etc.
If you only purchase one cover sheet, this is the one you want! This is the most popular reusable non-stick cover sheet in the industry. Heat Transfer Cover Sheets protect several things: your garment from direct contact with your heating element, HTV that’s been applied and no longer has a carrier, as well as
the heat plate of your heat press or home iron.
AlbaChem Vinyl Letter Removing Solvent completely removes vinyl letters and residues from most fabrics. The Yorker spout allows for easy application minimizing waste. Highly effective and fast drying, Vinyl Letter Remover saves you time and money by dramatically reducing "seconds". 20 fl oz.